Skip to main navigation.

Lighting

Light BulbArea Lights and Flood Lights

SBEC has available area lights, which offer you automatic dusk to dawn light for your safety and convenience.  For wattage and pricing refer to the list below.

 

TYPE MONTHLY CHARGE DESCRIPTION KWH NOTES
1. 6.15 175 watt Mercury Vapor 70 No longer available for replacement or new installations
2. 7.60 250 watt Mercury Vapor 90 No longer available for replacement or new installations

3.

8.55 400 watt Mercury Vapor 140 No longer available for replacement or new installations
4. 7.60 100 watt High Pressure Sodium 40 Standard Fixture
5. 9.05 250 watt High Pressure Sodium 105 Non-standard fixture:  $25.00 fixture fee + $60 connect fee
8. 9.05 400 watt High Pressure Sodium 175 Non-standard fixture:  $50.00 fixture fee + $60 connect fee
9. 7.60 175 watt Metal Halide 65 Standard Fixture
6. 9.05 250 watt Metal Halide 105 Non-standard fixture:  $25.00 fixture fee + $60 connect fee
7. 9.05 400 watt Metal Halide 175 Non-standard fixture:  $50.00 fixture fee + $60 connect fee
8. 10.00 54 watt LED 19

 $60.00 connect fee

9. 12.50 107 watt LED 38

 $60.00 connect fee

10. 15.00 157 watt LED 56

 $60.00 connect fee

Power supply charges apply monthly based on kWh for each light.

 

New Installations

A connect fee of $60 will be charged on area lights that are installed on an existing pole.
For installations requiring additional equipment, contact the Engineering Department for pricing information.

 

Reconnecting Lights

A connect fee of $60 will be charged to activate an existing area light.  If the area light is activated when meter is connected, no charge will apply.

Mercury vapor area lights can no longer be replaced and are no longer available for new installations.  When existing mercury vapor area lights need to be replaced, the Coop will install a comparable High Pressure Sodium device at no cost to the member.

Powered by Touchstone Energy Cooperatives Logo